| Thu, 24 Aug 2023 16:52:10 +0930 |
Daniel O'Connor |
Python3ise RSIB code
default tip
|
| Mon, 30 Aug 2021 12:40:43 +0930 |
Daniel O'Connor |
Move pylab import to where graphing is so we don't need an X server
|
| Wed, 04 Aug 2021 16:07:44 +0930 |
Daniel O'Connor |
Make function more configurable
|
| Tue, 19 Jan 2021 17:32:57 +1030 |
Daniel O'Connor |
Add example code to configure a Rigol DSG815 for a frequency sweep
|
| Tue, 19 Jan 2021 17:17:55 +1030 |
Daniel O'Connor |
Add chkcmd helper to execute command check STB to see if it failed.
|
| Tue, 19 Jan 2021 17:13:21 +1030 |
Daniel O'Connor |
Perform a dummy write/read after initiateClear and check the event/error queue bit.
|
| Tue, 19 Jan 2021 16:06:29 +1030 |
Daniel O'Connor |
Add initiateClear and a few others and use it to clear buffers on setup.
|
| Fri, 08 Jan 2021 14:10:24 +1030 |
Daniel O'Connor |
Add simple scope example
|
| Fri, 08 Jan 2021 14:10:20 +1030 |
Daniel O'Connor |
Add simple spectrum analyser example
|
| Fri, 08 Jan 2021 14:06:52 +1030 |
Daniel O'Connor |
Use edge detection to log time differences between edges
|
| Fri, 08 Jan 2021 14:06:27 +1030 |
Daniel O'Connor |
Add code to measure phase difference between 2 signals by sampling
|
| Fri, 08 Jan 2021 14:04:18 +1030 |
Daniel O'Connor |
Honour timeout passed into ask()
|
| Fri, 08 Jan 2021 14:04:09 +1030 |
Daniel O'Connor |
Change default timeout to 500msec
|
| Fri, 08 Jan 2021 14:03:52 +1030 |
Daniel O'Connor |
Fix for Python 3
|
| Fri, 08 Jan 2021 14:01:41 +1030 |
Daniel O'Connor |
Make it more tolerant if we can't read strings.
|
| Tue, 08 Dec 2020 14:00:45 +1030 |
Daniel O'Connor |
Run through 2to3
|
| Tue, 08 Dec 2020 13:59:05 +1030 |
Daniel O'Connor |
Use BaseException rather than strings.
|
| Thu, 02 May 2013 17:55:20 +0930 |
Daniel O'Connor |
Improve usage message.
|
| Thu, 21 Mar 2013 12:08:15 +1030 |
Daniel O'Connor |
Log some stats after multiple runs.
|
| Thu, 21 Mar 2013 11:48:42 +1030 |
Daniel O'Connor |
Add option to run for N iterations and exit.
|
| Thu, 21 Mar 2013 11:11:10 +1030 |
Daniel O'Connor |
Allow bandwith to be set (maintains a 10:1 ratio of vid:res BW)
|
| Thu, 31 Jan 2013 13:00:11 +1030 |
Daniel O'Connor |
- Print configuration details before starting
|
| Thu, 31 Jan 2013 12:53:22 +1030 |
Daniel O'Connor |
Turn averaging on otherwise we throw away all but the last sweep.
|
| Thu, 31 Jan 2013 11:32:06 +1030 |
Daniel O'Connor |
Fix comment
|
| Thu, 31 Jan 2013 11:24:49 +1030 |
Daniel O'Connor |
- Calculate ENR (based on table on the back of our noise source)
|
| Thu, 20 Dec 2012 11:48:19 +1030 |
Daniel O'Connor |
Add noise test
|
| Thu, 20 Dec 2012 10:59:18 +1030 |
Daniel O'Connor |
Commit final version that went to Norway
|
| Wed, 28 Sep 2011 17:15:23 +0930 |
Daniel O'Connor |
Use *OPC where supported, otherwise poll.
|
| Wed, 28 Sep 2011 17:14:30 +0930 |
Daniel O'Connor |
Manually range check, older scipy's don't have bound_error.
|
| Wed, 28 Sep 2011 14:38:23 +0930 |
Daniel O'Connor |
Use scipys interpolation routines rather than hand rolling.
|
