view flash.c @ 8:58d76cf522ff

Split out code into separate files.
author Daniel O'Connor <darius@dons.net.au>
date Sat, 04 Feb 2012 13:29:31 +1030
parents
children bd8e2cf04034
line wrap: on
line source

#include <stdint.h>

#include "stm32f10x.h"
#include "spi.h"
#include "flash.h"

#define FL_SELECT()	GPIO_ResetBits(GPIOA, GPIO_Pin_4)
#define FL_DESELECT()	GPIO_SetBits(GPIOA, GPIO_Pin_4)

uint16_t
flashreadid(void) {
    uint8_t	fac, dev;
    
    FL_SELECT();			/* Select device */

    SPI_WriteByte(FL_RDID);		/* Send command */
    SPI_WriteByte(0x00);		/* Send address cycles (ID data starts at 0) */
    SPI_WriteByte(0x00);
    SPI_WriteByte(0x00);
    fac = SPI_WriteByte(0x00);		/* Read ID */
    dev = SPI_WriteByte(0x00);
  
    FL_DESELECT();			/* De-select device */

    return fac << 8 | dev;
}

uint8_t
flashreadstatus(void) {
    uint8_t	status;
    
    FL_SELECT();			/* Select device */

    SPI_WriteByte(FL_RDSR);		/* Send command */
    SPI_WriteByte(0x00);		/* Send dummy byte for address cycle */
    status = SPI_WriteByte(0x00);	/* Read status */
  
    FL_DESELECT();			/* De-select device */

    return status;
}

void
flashwritestatus(uint8_t status) {
    /* Enable status write */
    FL_SELECT();			/* Select device */
    SPI_WriteByte(FL_EWSR);		/* Send command */
    SPI_WriteByte(0x00);		/* Send data byte */
    FL_DESELECT();

    /* Actually write status */
    FL_SELECT();			/* Re-select device for new command */			
    SPI_WriteByte(FL_WRSR);		/* Send command */
    SPI_WriteByte(status);		/* Send data byte */
    FL_DESELECT();			/* De-select device */
}