# HG changeset patch
# User darius@inchoate.localdomain
# Date 1240207520 -28800
# Node ID d111f64eb619b823adb011c74a6b13158bfa8af5
# Parent  3da232f97e810572f97303eba10e0b56ca684963
Add example 1wire-config.h file for other people to look at.

diff -r 3da232f97e81 -r d111f64eb619 1wire-config.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/1wire-config.h	Mon Apr 20 14:05:20 2009 +0800
@@ -0,0 +1,95 @@
+/*
+ * Example configuration header for 1-wire bus code.
+ *
+ * This is the user servicable stuff - how to do delays and how to
+ * frob the IO pins.
+ *
+ * Copyright (c) 2009
+ *      Daniel O'Connor <darius@dons.net.au>.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * Alter these for your configuration
+ *
+ * The configuration described here has the 1-wire read on D3,
+ * a pulldown transistor on D4 and VPP controlled by D5.
+ */
+#error You must edit this file to suit your project
+
+/* Initialise the DDR pins if necessary */
+#define OWBUSINIT()		do {			\
+	                            DDRD |= _BV(4);	\
+				    DDRD &= ~_BV(3);	\
+                                } while (0)
+
+/* Set the port up to allow reading from the 1 wire bus */
+#define OWSETREAD() \
+        do {	                                        \
+    } while (0)
+
+
+/* Read the 1-wire bus, non-inverting logic */
+#define OWREADBUS()		(PIND & _BV(3) ? 1 : 0)
+
+/* Set the 1-wire bus to 0
+ * Turns a transistor on to pull it low
+ */
+#define OWSETBUSLOW()		PORTD |= _BV(4)
+
+/* Set the 1-wire bus to 1
+ * Turn the transistor off to let the pullup do its job
+ */
+#define OWSETBUSHIGH()		PORTD &= ~_BV(4)
+
+/* Turn Vpp on (ie put +12V on the bus
+ * This is optional, if it is undefined OWProgROM always fails */
+#define OWSETVPPON()		PORTD |= _BV(5)
+#define OWSETVPPOFF()		PORTD &= ~_BV(5)
+
+/* _delay_us can only do a delay of 768/clock_freq */
+#if F_CPU > 16000000
+#error F_CPU > 16MHz, delays need adjusting
+#endif
+
+#define OWDELAY_A _delay_us(6)						/* 6 usec */
+#define OWDELAY_B do { _delay_us(48); _delay_us(16); } while (0)	/* 64 usec */
+#define OWDELAY_C do { _delay_us(48); _delay_us(12); } while (0)	/* 60 usec */
+#define OWDELAY_D _delay_us(10)						/* 10 usec */
+#define OWDELAY_E _delay_us(9)						/* 9 usec */
+#define OWDELAY_F do { _delay_us(55); } while (0)			/* 55 usec */
+#define OWDELAY_G							/* 0 usec */
+#define OWDELAY_H do { _delay_us(48); _delay_us(48);  _delay_us(48); 	\
+	_delay_us(48);	_delay_us(48);  _delay_us(48);  _delay_us(48);  \
+	_delay_us(48);_delay_us(48);  _delay_us(48); } while (0)	/* 480 usec */
+#define OWDELAY_I do { _delay_us(48); _delay_us(22); } while (0)	/* 70 usec */
+
+#ifdef OW_DEBUG
+#define OWPUTS(x)		puts_P(x)
+#define OWPUTSP(x)		puts_P(x)
+#define OWPRINTFP(fmt, ...)	printf_P(fmt, ## __VA_ARGS__)
+#else
+#define OWPUTS(x)
+#define OWPUTSP(x)
+#define OWPRINTFP(fmt, ...)
+#endif